I'm looking at rims and the ones I want have a 45+ offset. Our stock rims have a 40+. I don't want to modify the inner fender or anything, so if it does fit i'll keep looking.

I've wondered the same thing too. I want enough just to line up the wheels with the edge of the fender, without going outside or having to modify it.

Originally posted by andre
I've wondered the same thing too. I want enough just to line up the wheels with the edge of the fender, without going outside or having to modify it.

If that's the case... You don't want a 45mm offset wheel... You want something closer to 38 or 35mm.

Bwilsor: I believe you should be okay if you don't go beyond a 7" wide wheel. Thankfully, you have a 200SX, so you won't have issues in the rear like the B13 does. However, if you could find something with a 40, 38, or 35mm offset, that would be preferable... Wider = better (from a cornering standpoint). :)

I believe I have a 32mm offset and my wheels are 16x7.5. I only rub on 1 fender. Boy shop says my frame is bent.:confused:

I have a 45mm offset on my 17's and I have no rubbing. By the way they are 7.5 wide.