Hey guyz and girlz, I was wondering if anyone here did the ES MM swap in their 200 yet? If you have, is the rear MM difficult to install? From what I can see just from looking at it, it looks like it's going to be a pain :mad: !!! I replied to a post in the general forum about this, but I was hoping a I could get some info from you guyz and girlz too. Any help would be greatly appriciated. TIA

I've installed them many times. I have 2 methods for installing them. #1: Use soapy water. I've tried WD40 before, and it didn't work as good as a little drop of shampoo in a cup of water. #2: If you can use a bench grinder, sand the flat parts down. This makes the inserts thinner, and they slide in better. Make sure to bolt the rear mount in first, then the front. This gives you the room to move the crossmember around to align everything. Let me know if you need any more help.