I am on a friends account, I am not Chris..

I am in the middle of a GTi-R Swap into a 96 SE-R. I have the JWT GTi-R ECU, dropping resisters for GTi-R 440cc injectors, Cobra MAF and that should about sum up the most important stuff.

I swapped O2 Sensor plugs, I am in the middle of putting the GTI-R injectors plugs on the stock 96 SE-R harness. I sitll have to switch the TPS outter wires. But I am wondering if anyone has pictures or information on what to do with all the vacuum lines and stuff. I figure the electric plugs should speak for themselves and plug in where they need to go?

Any advice on the wiring and vacuum lines owuld be great... I removed the cruise control system, hmm what else.. Well the only vacuum lines to hook up on the chassis, where there is only the charcoal canister one... but all the vacuum lines on the GTI-R motor are cut... I am not familiar with the switching valves and what not so I dont know how to hook them all up...

Any help would be appreciate.. please email:
mister2racer@aol.com
or call Charles at 630-879-8141

Thanks