Bungholio
05-02-2006, 05:49 PM
This is a cross thread over from G20.Net (I dont know how to upload pics onto here but there are pics in the original thread)
http://www.g20.net/forum/showthread.php?t=47383
The now bolt on kit was removed from my 1999 AUTOMATIC G20. Besides the first two items below, all other parts are brand new as stated or used for 100 miles on my vehicle. The kit was on my car for 100 miles (97 Miles if you want to be exacto).
1) Avenir W11 Ball Bearing Turbo, Manifold, J Pipe, Dump pipe, Actuator in tact set at 8lbs, and oil return line + 1/2 end 5/8 opening fitting for block.
2) 370CC SR20DET Side Feed Injectors from an S14 (as I was told) and Small chip on one of the injectors casing. Was like that when recieved and worked fine without any problems.
3) JWT OBDII ECU Programmed for Stock SR20DE Motor, MAF, + 370CC Injectors Auto Tranny. I read somewhere that you can use the Auto Tranny ECU on a Manual but not the other way around. Someone confirm or deny this please.
4) HKS Type 1 Turbo Timer BRAND NEW.
5) 9 Brand New Vibrant rubber couplers, 1 VERY slightly used Vibrant rubber coupler - 10 pieces in black. 22 BRAND NEW Vibrant TBolt clamps.
6) Half JWT Piping, Half Customized to specifically fit a 99 G20 (From throttle body to intercooler) with Precision Engineering Intercooler. 2 Red Vibrant Rubber Couplers, 1 Blue Vibrant Rubber Coupler, 6 Shitty JWT Silicone Couplers and 20 JWT Super Racing Home Depot Clamps. Also a MAF adapter to fit a 99 G20 MAF sensor and comes with a cone intake with the top tapped out for the cold air sensor.
7) GReddy Type RS BOV (100 Miles old)
8) Custom 2.5" Downpipe to mate with Avenir Manifold. (100 Miles old)
9) Resonator extended to fit onto stock exhaust and removal of stock cat. Also comes with the o2 sim sensor and bunghole in it.
So basically all you would need to make this fit onto your car is the following that is not included because im a Bunghole. (I couldn't find it after assembly)
1) Miscellaneous bolts to fit the downpipe onto the manifold.
2) Miscellaneous water in/out and oil feed line + t fittings.
3) Oil Feed adapter.
Firmly asking $2000 + paypal fees + shipping costs to your location. Pick up for the kit is available if you are willing to drive into NYC or are in the area.
For those who are wondering about the authenticity of the BB Turbine the casing reads as follows from top to bottom along the metal plate:
It reads from top to bottom:
Garret (logo on far right corner)
Made In Japan (centered top)
DC-0145J
14411-WF500
471171-G
Feedback is available on the G20.Net forums. I dont roam around here too much, but you can PM me here or PM me over at G20.Net forums if you are registered there. If not you can reach me by email @ mybungholio@aol.com. I must warn you that I dont check that email that frequently and your best chance is to really go over to G20.Net and PM me over there.
For those who are wondering, The car was dismantled for financial reasons and the car is now on the way out. I couldn't sell the car boosted so it was the wiser choice to de-tune it and part it.
Thank you.
http://www.g20.net/forum/showthread.php?t=47383
The now bolt on kit was removed from my 1999 AUTOMATIC G20. Besides the first two items below, all other parts are brand new as stated or used for 100 miles on my vehicle. The kit was on my car for 100 miles (97 Miles if you want to be exacto).
1) Avenir W11 Ball Bearing Turbo, Manifold, J Pipe, Dump pipe, Actuator in tact set at 8lbs, and oil return line + 1/2 end 5/8 opening fitting for block.
2) 370CC SR20DET Side Feed Injectors from an S14 (as I was told) and Small chip on one of the injectors casing. Was like that when recieved and worked fine without any problems.
3) JWT OBDII ECU Programmed for Stock SR20DE Motor, MAF, + 370CC Injectors Auto Tranny. I read somewhere that you can use the Auto Tranny ECU on a Manual but not the other way around. Someone confirm or deny this please.
4) HKS Type 1 Turbo Timer BRAND NEW.
5) 9 Brand New Vibrant rubber couplers, 1 VERY slightly used Vibrant rubber coupler - 10 pieces in black. 22 BRAND NEW Vibrant TBolt clamps.
6) Half JWT Piping, Half Customized to specifically fit a 99 G20 (From throttle body to intercooler) with Precision Engineering Intercooler. 2 Red Vibrant Rubber Couplers, 1 Blue Vibrant Rubber Coupler, 6 Shitty JWT Silicone Couplers and 20 JWT Super Racing Home Depot Clamps. Also a MAF adapter to fit a 99 G20 MAF sensor and comes with a cone intake with the top tapped out for the cold air sensor.
7) GReddy Type RS BOV (100 Miles old)
8) Custom 2.5" Downpipe to mate with Avenir Manifold. (100 Miles old)
9) Resonator extended to fit onto stock exhaust and removal of stock cat. Also comes with the o2 sim sensor and bunghole in it.
So basically all you would need to make this fit onto your car is the following that is not included because im a Bunghole. (I couldn't find it after assembly)
1) Miscellaneous bolts to fit the downpipe onto the manifold.
2) Miscellaneous water in/out and oil feed line + t fittings.
3) Oil Feed adapter.
Firmly asking $2000 + paypal fees + shipping costs to your location. Pick up for the kit is available if you are willing to drive into NYC or are in the area.
For those who are wondering about the authenticity of the BB Turbine the casing reads as follows from top to bottom along the metal plate:
It reads from top to bottom:
Garret (logo on far right corner)
Made In Japan (centered top)
DC-0145J
14411-WF500
471171-G
Feedback is available on the G20.Net forums. I dont roam around here too much, but you can PM me here or PM me over at G20.Net forums if you are registered there. If not you can reach me by email @ mybungholio@aol.com. I must warn you that I dont check that email that frequently and your best chance is to really go over to G20.Net and PM me over there.
For those who are wondering, The car was dismantled for financial reasons and the car is now on the way out. I couldn't sell the car boosted so it was the wiser choice to de-tune it and part it.
Thank you.