Ok ever since my turbo swap my injectors have been giving me problem after problem. I got 370cc injectors with my kit, but the injectors did NOT come with those orange clip things on the end of the injector (holds the o rings in place) so i took the ones off my stock injectors, of corse they had to be broken to come off. All the other injectors seem to be fine but the #4 cyl keeps blowing rings and when i pull the spark plug the cyl is full of gas....

So is there any other problems i should check for or just spend the cash and buy New injectors that will have everything on there right????

ARe you lubing the o rings before installing the injector back in the rail?

yea i have lubed the shit out of them everytime...

you can get new pintel caps from rc engineering.

whats that?

whats that?


the plastic cap at the botom of the injector is called a pintel cap. it holds the lower o-ring in place and has fingers that I believe are there for the spray pattern. you could also get them from deatchwerkz.com. I would recommend sending in the injectors and having a professional replace them. you can usually get the injectors cleaned and the pintel caps replaced pretty cheap.