Here is a list of accumulated parts that I need to clear out as I am no longer going to own a B14 SER.

****EDITED 6-7-06*****

SOLD b13 struts
1 set b14 struts
Shifter linkage
Consult
A pillar
ES shifter bushing

Nobody needs a Stock Cat for B14 SER ??????? 4 stock front calipers w mounts and line for $75 is a deal !!!!

B14 cruise control vacuum canister and cable
Cruise control computer b14
G20 ecu ?1990 ? email me and I'll give you the code off it so you can look it up on JWT's site
B14 dimmer switch , mirror switch group

I set b14 struts left complete w springs fully assembled, local pickup hopefully
1 set of b14 springs and tophats

ES large front engine mount, new not installed $20
ES LCA arm front bushings ( not the large one ) new not installed $15
3 sets B14 stock air boxes and hoses mostly complete $25 each
Stock B14 exhaust manifold complete with downpipe to cat, and exhaust heat shield $50
Stock B14 Catalytic converter, one rear stud needs removing, but good shape $75

NX 2000 front stock sway bar 27mm for those wanting to carve them better, complete with mounts and endlinks $35

2 sets (4) B14 stock front brake calipers, one set with less than 32K on them, complete with stock brake lines, the other set bought as spares before the nx brakes went on my car. $75 for all four complete with lines.

1 set rear calipers B14 compete with mounts. Work fine $50

e brake cables for B14 and g20....$25 for all of them 6 IIRC

Stock 95-98 SR20DE intake manifold, comes with fuel rail, injectors, AAC valve, FPR, EGR valve and EGR tubing, no TB $75


I do have paypal but will want the 3% they charge. I will deliver up to 75 miles from my house in Marietta GA for cost of a couple good microbrews.

Milburn

What kind of shape are the b13 struts in?

They look OK. I bought them locally off Dr. Rob as part of a project to lower the B14 using only stock parts. (lowers about 3/4 " accordiing to SER.net )

I ended up never installing them as I decided to go with D2 coilovers.

I will be more than happy to bolt them into your car and you can test them. You like them you buy them . Plus 2 microbrews OK ?

Milburn

As long as they are in good shape, I'll take them. I will be sending them to Steve for shortened Koni inserts. I just can't afford to be carless for 4-6 weeks.

Sounds good. You're doing the right thing with Steve, great guy. Call me at 770-289-7588. We can arrange for you to pickup or I can deliver next weekend. $25 + a Sam Adams if I deliver :-)

Milburn

I want to make it clear that the Consult is : ATEK 14 pin cable, board, serial cable. The alum proj box has alum endplates that need trimming to fit the serial ends of both cables. The Datascan 1.4 software is on CD. The system has been checked on 2 B13's ( one with JWT VE ecu ) and 2 b14's ( one with 96 G20 ecu ) as well as the Quest. I actually use it with a USB to serial adapter running from my laptop. The USB adapter/cable is not going to be sold with the unit as I can't find the driver disk that came with the USB adapter. :squint:


I have also used this board with Calums Calumsult. Works fine.

Someone just Pm'd me saying $80 shipped for just the cable. I rather think they'd need the board, both cables, and would want the box. But I will sell "the serial and ATEK cable" for $80. And later sell the board to someone more knowledgable.

i'll take the a piller... pm sent

PM sent.

Interested in the consult, check PM

The USB adapter/cable is not going to be sold with the unit as I can't find the driver disk that came with the USB adapter. :squint:


I have also used this board with Calums Calumsult. Works fine.

Someone just Pm'd me saying $80 shipped for just the cable. I rather think they'd need the board, both cables, and would want the box. But I will sell "the serial and ATEK cable" for $80. And later sell the board to someone more knowledgable.
BTW, where did you get your USB adapter/cable from?

I am interested in the a pillar gauge pod... is it for b14? and what color is it?

aaron

MicroCenter in Marietta GA. It was $20 IIRC. Came with one of those mini 2.5" cds with the drivers on it. Basically for those laptops with USB only, it remaps and assigns COM4 thru itself. Totally seamless in XP At least on my Dell Inspiron 600.

I couldn't believe it when I installed it and everything Worked immediately. I built a few other boxes and gat another guy the same cable and it worked on his laptop too, he tells me. I guess I ought get back there and get the info for you guys. They do have alarge WebSite and do Internet business.

OK PayPal Address is memer02@emory.edu

Sheesh Pm box fills up fast !!!!

Reminder on Consult. You need a laptop or some other computer to run Nissan Datascan 1.4. Calum's Consult box does not have an LCD screen like the impakt box.

OK dibs list

SERfanatic Calum Consult box, board,cables,software
BJ200SX A-pillar
Fred99sr20 primary exhaust Fred $50 shipped
Peanuthead A-pillar ( if bj dont get it )
Eric96SER A-pillar 3rd inline
GTSWRX Calum Consult as above if SERfanatic goes off
Boomer Calum consult 3rd inline


SERfanatic paypal me $100 and an address to ship to . I'll send it UPS and post Tracking number for you
BJ200sx same deal $20 I'll have to find some sort of mailer for that.
Fred99sr20 Its heavy!!! But $50 shipped OK Paypal me

I think that catches up...Oh add 3% gentlemen for Paypal's minions. :-)

Please ask me any questions. For pics email me at : memer02 @emory.edu and i'll take some and email them back.

No I ain't a student :squint:

Laterz milburn

Well I did not find the USb Driver disk but....I found the box it and the adapter it came in. www.cableunlimited.com USB 2.0 to serial adapter USB-2920 UPC 2458032070. MicroCenter had it for 19.95. PLUS tax. :rolleyes:

money sent

I am interested in the consult if you are interested in trades....

I am interested in the consult if you are interested in trades....RedDragun : Go up four posts and see the dibs list, young man. Dibs means they got there first. SERfanatic has said he'll gimme cash $100. Why would I allow you to jump in and try to trade me for something when they were ahead of you?

From all your posts I ve seen ,you have a real problem with actually reading the posts, or digging up info. Or butting in. Go away. Permanently.

Milburn

no harness?

ebrake cables used?!?!?!

WTF is your problem? All I said is I was interested. I saw the list, you haven't really updated on that list. I was inquiring what the status was on it, but nvm because you are an asshole.

Please ask me any questions. For pics email me at : memer02 @emory.edu and i'll take some and email them back.
Yes I did read your posts, maybe you should read what you write.