who's in?

me in SE-R

one entry in SRX (the first on the east coast i believe:biggthump )

anyone else?

I'm signed up too.

Wade

Same weekend as my shop's Annual Open House... :(

cool, glad wade you will be there to race

sorry bad timing for you kevin, you still thinking VIR for your license ?

sorry bad timing for you kevin, you still thinking VIR for your license ?

Hopefully...we'll see.

I'll be there flagging.

I suppose I can show up as a spectator and sweat my nuts off. Last time I went to Hyperfest it was 108 in the paddock.http://smileys.smileycentral.com/cat/28/28_1_9.gif

My hpde budget went out the door when my tranny blew in the turbo car last month. :(

Im there flagging too. Not sure if Ill even have the se-r with me.. Hpde at vir a few weeks later.


Stephen, when are you planning on leaving?

I will be there. SRX. We'll see if the car passes tech. Should be interesting.

I will be there in a new Sentra racecar that I just picked up today. I don't recommend Richmond to Tampa and back to Richmond in 30 hours. I also highly encourage a diesel tow vehicle, something that I have great envy for after this trip.

Eric R.
'93 SE-R Turbo
'93 SE-R Cup Car
'91 SE-R Cup Car soon to be put to pasture

Congrats Eric. Lets dyno it!

I will be there in a new Sentra racecar that I just picked up today. I don't recommend Richmond to Tampa and back to Richmond in 30 hours. I also highly encourage a diesel tow vehicle, something that I have great envy for after this trip.

Eric R.
'93 SE-R Turbo
'93 SE-R Cup Car
'91 SE-R Cup Car soon to be put to pasture

Thats awesome Eric. What happened to your old cup car? Is the new one ready to go? Let me know if it needs anything, I've got some random se-r parts laying around.

Kevin:

I have to work Sat and Sun. However, I have Monday off, so I will register the thing and bring it over to dyno.

Mike:

My old car is just very tired and banged up and it needs some wiring done to it. As for the new car, it is pretty much ready to go. I just need to swap suspension, brakes, and that's about it. It will defintely need some cage work done as well. Thanks for the offer of parts. Acutally this car came with some awesome spares inluding the original motor and trans which was taken out of the car with only 2,000 miles.

The car only has 32,000 miles on it.

Eric

zack, i'm leaving friday evening after work if you need a lift

Kevin:

I have to work Sat and Sun. However, I have Monday off, so I will register the thing and bring it over to dyno.


Consider it done. I dont remember from the FS post, but does it have any motor mods? Cams? Compression bump?

the car only has 32,000 miles on it.

I hate you right about now.

The motor is supposedly balanced and blueprinted for whatever that's worth.. It also has a Nismo exhaust cam, JWT ECU. I drove it tonight on Manakin Road. Besides, very loud, it felt pretty quick, I guess. I will bring it by on Monday.

It does need a new passenger door becuase that is a little crunched. Otherwise the car looks pretty darn good.

versus the old car which had the many race miles on it i think;)

The car only has 32,000 miles on it.

Eric

Well, I'll dyno it for the small sum of your old C3's. I feel thats fair. I mean, it's hot in that shop nowadays.

I'm sure you are keeping your old motor, but if not I need cam/valvetrain parts badly!

See ya tomorrow.

I will be there. SRX. We'll see if the car passes tech. Should be interesting.

why would you not pass tech?


ill be there doing HPDE supporting the first time SRX on east coast.

I will be there. SRX. We'll see if the car passes tech. Should be interesting.

can't wait to see this car out there:biggthump :biggthump