I just finished a GTi-R swap in a customer's 1996 SE-R. The customer provided me with a GTi-R Harness and ECU, but I did not use them, I went with a JWT ECU, Cobra MAF, and injector resistor combo. This was my first SR engine swap... I done a 200SX before, but a stock motor swap, 1.6-1.6.

I want to thank Chris at SR20Development for overnighting me a bunch of parts... he went out of his way to get me the stuff I needed ASAP.

Anyhow, the wastegate actuator on this thing is at 9psi... the Apexi website doesnt have the ECU pinouts for the OBD-II SE-R... so if someone has the manual or something and can scan a page or something so that I can tell what pins are what? I wanna get this AVC-R in.

I would appreciate it, thanks.

The car isnt running right yet, its running rich off the scale on the wideband on the dyno. I beleive I have a massive boost leak... gonna try and work that out tommarow. Car gets a lot of attention driving around without a hood... and the BOV isnt on yet, the compressor surge is extremely loud, its a head turner.

http://www.cj-motorsports.com/cars/rikki/pic5.jpg

http://www.cj-motorsports.com/cars/rikki/pic6.jpg