|
200SX Si-R 04-08-2002, 03:03 PM I've searched se-r.net archives and have found some info. Some people have said with the 7" spring, the rear wheel gap still looks stock(a$$ up), even at it's lowest setting. Is this true? Anyone have contrasting opinions? Is it possible to get GC springs in a 6" length? If so, what is the part#? Needing to get rid of these Sportline springs... Sunny 04-08-2002, 10:01 PM what kind of car do you have? i have the GC's w/ the 7 inch springs and i have turned the adjuster from the top down to 13 turns and have lowered the car 1.25 inches, same drop/lowered height as my Tokico springs that i had in the car and still have about halfway to go before maximum drop on the GC's. Tevs madburner 04-09-2002, 03:16 AM I just put mine (7") in this weekend so they still need to settle. They are coupled with KYB AGXs set at 2 and the motivational rear strut tops. They're set nearly to the lowest setting (about 2 more complete turns to reach the bottom) and they sit about 1.25" lower than stock even though they still should settle down even more with some more weight in the back. My rear tires are tucking under now. Hope that helps. I'll post some pics soon when the weather gets a little better up here.:D 200SX Si-R 04-09-2002, 06:24 PM Sunny- i have a 97 SE-R. I'm not sure if there's a gap difference between Classics and 200s since I just read your message and madburner's message. It sounds like you adjusted your springs about halfway down while madburner got the same drop with his setup, but had 2 more complete turns left towards the bottom. Madburner- if you can post some pics whenever you have time, that would help out alot. :D Just PM me whenever you get them. OR if anyone with a B14 and GCs(6" or 7" rear springs) has pics, can you post some pics of the rear. Just wanna get an idea? Thanks guys for you help! :) 98sr20ve 04-09-2002, 09:05 PM Originally posted by 200SX Si-R I've searched se-r.net archives and have found some info. Some people have said with the 7" spring, the rear wheel gap still looks stock(a$$ up), even at it's lowest setting. Is this true? Anyone have contrasting opinions? Is it possible to get GC springs in a 6" length? If so, what is the part#? Needing to get rid of these Sportline springs... When you go with a shorter spring you also lose spring travel. They post this stuff on thier website. Be carful. Steve | ||