Luke is trying to set me up with some Motegi's but we are having trouble finding the right centering ring.

Bore on the wheel is 70.5mm and his computer shows the B13 Sentra center hub at 59.01mm. His computer can't seem to find the ring that would mate these two together. What do those of you running this setup (Dan and Paul) use for a center ring? Where can I get a set?

Thanks!

All is well in Nashville BTW -- sorry I have not been on here much. The move and new house has been monopolizing my time -- but I am now turning back to the car again.

You could try discout tire direct or:
http://www.1010tires.com/hubrings.asp

Don't need a ring, I never run them and don't get a vibration :cool:

Don't run that wheel anymore because of severe bending and longterm availability issues. Never used a ring when I had it. Run the Kosei K1 TS wheels which you can get from TR as well, and I use a 5 mm spacer and ARP Miata studs.