Hey guys, I have a 94 P10. It is running low on power. THe wires on there might be on wrong. Can someone show me a picture or tell me which one is #1 #2 #3 and #4?

Or is everything labeled on there?

If the wires were wrong your engine would be doing the funky chicken dance.
Your best investment would be to purchase a Haynes Manual for your car.
Its a MUST HAVE!!! It will answer alot of questions for you.

Have you pulled the plugs to see if they are in good condition?

There is no Haynes manual for the Infiniti G20. I did buy one for the 82-94 Sentra, would this work?

I havent pulled the plugs yet, i was going to change them tomorrow, but being a smart ass that i am. I think the dealer gave me the wrong plugs. They gave me the BKR6E-11, not the BKR6E. From what i heard, those plugs were used on the GA16, not the SR20, so i have to wait again tomorrow befor ei can do the plugs, was gonna do it a 7 AM

There is no Haynes manual for the Infiniti G20. I did buy one for the 82-94 Sentra, would this work?
For the engine it will.
I havent pulled the plugs yet, i was going to change them tomorrow, but being a smart ass that i am. I think the dealer gave me the wrong plugs. They gave me the BKR6E-11, not the BKR6E. From what i heard, those plugs were used on the GA16, not the SR20, so i have to wait again tomorrow befor ei can do the plugs, was gonna do it a 7 AM
Those plugs will work, just gap them accordingly. Good job on getting the Heat Range of 6. Give yourself a pat on the back. ;)
The plug wires will work wonders when you get them changed. Just be sure to stay OEM for better performance measures.

Well the owners manual tells me to get the BKR6 plugs, it just didnt tell me that there is a difference between that and the BKR6-11