Rotas on an NX [Archive] - SR20 Forum

: Rotas on an NX


NismoSER
04-24-2002, 12:18 AM
Just wondering if anyone has any pics of Rotas (any kind) on an Aztec Red NX2K.

Which Rota do you all think would look good on a red NX? I'd say probably the slipstreams in gunmetal grey....

silversx
04-24-2002, 01:30 AM
I wouldn't mind seeing any pictures, either. I was thinking bronze if i were to get them...

Scarpa
04-24-2002, 02:08 AM
I have bronze Slipstreams on my NX and they look really good. I think RollcageSR20 has pictures of my car with them from a recent autocross..

RollcageSR20
04-24-2002, 02:39 AM
Paul,

Some pics can be found here:

http://photos.yahoo.com/rollcagesr20

Look under the SFR SCCA folder.

Scarpa
04-24-2002, 12:38 PM
Ok here's a good shot of the wheels (and the non-dented side of my NX :))

http://www.slimside.com/slipstream_NX.jpg

tpeele
04-24-2002, 01:12 PM
What size wheel and tire are you running. Are they offest 40mm? Do you have enough clearance?

Tim

Scarpa
04-24-2002, 01:57 PM
Originally posted by tpeele
What size wheel and tire are you running. Are they offest 40mm? Do you have enough clearance?

Rota Slipstreams - 15x6.5, 40mm offset
Falken Azenis - 205/50/15

They are very close to the strut in the rear, and rub on occasion. I have been very pleased with the performance of this combo.

nx2kracer
04-24-2002, 03:25 PM
http://205.128.201.21/roll22.jpg

Rota Circuit 8's 15x6.5(??)


Lee

NismoSER
04-24-2002, 03:36 PM
Good Lord, what happened to that NX??

Thanks for the pics everyone. Anyone with Subzero's on an NX? I think the two choices are between the Slipstreams and the Subs....not too sure on the color yet though. I was leaning toward grey. White would look the best but its not worth the hassle of keeping them clean.

silversx
04-24-2002, 05:12 PM
those bronze rotas are nice. i was wondering how they would look and i must say, they are awesome! where is the best place to purchase them in 15" size? I found them at seriousauto.com for $450.00..

Da91NX
04-24-2002, 05:33 PM
$450 shipped (http://www.machiii.net/machiii/html/main001.html)

Scarpa
04-24-2002, 07:10 PM
I bought mine from SeriousAuto for 400. I didn't pay shipping as they are about half a mile from my house.

Even if they don't have the absolute best price I'd still recommend them. Top Notch service. They are a very friendly bunch of car nuts.

Thanks for the compliments on the bronze wheels too. I was hesitant as well but it worked out great.

MarC
04-24-2002, 07:29 PM
Originally posted by nx2kracer
http://205.128.201.21/roll22.jpg

Rota Circuit 8's 15x6.5(??)


Lee

Dont try to fake like you have those wheels!!!!! :)

FastNX
04-25-2002, 12:28 AM
I have Rota subzeroes gunmetal and a 91 aztec red NX. To tell you the truth, I was reall, really disappointed with the look. Besides, there is not enough clearence with the axle to put the centre caps on. I will have to saw about an inch off the axle (OUCH) to make it fit. I would send a pic but i only put about 10 miles on them before pulling them off the car, need an alignment