|
Dswtflip4u 04-24-2002, 06:44 AM I am selling this kit because going turbo. I have the ECU and all the hardware to install. I also have an intake manifold that is direct ported. 4 foggers with .26 jets. Ready to go. Email me for price. Bryan Dswtflip4u@aol.com (469)223-6213 97 Black SER 04-24-2002, 02:17 PM high port or low port? SE-Rican 04-24-2002, 02:58 PM B13 or B14 ? Dswtflip4u 04-24-2002, 03:59 PM It is NOS kit is probably 1200 with all the hardware, bottle heater, purge kit. All you need would be 370cc injectors. I also have a new direct ported tapped intake manifold. 4 foggers for better efficiency to ensure nos is injected evenly to each cylinder. Let me know if you are interested. I could probably let go of EVERYTHING that I have including the ECU to the manifold for 1700 with shipping. That is including the freshly cleaned 370 cc injectors and everything you need to hook it up with the Manifold I made that is direct ported. I will also include the indash NOS gauge from autometer all hardware included. If you need individual pieces . Let me know , we might be able to work something out. rom a 96 nissan 200sx se-r and that is a lowport motor. SE-Rican 04-24-2002, 04:09 PM Will you sell the ECU by itself? If so is it for a B13 or B14? Hit me up on AIM Boyrican3 Dswtflip4u 04-24-2002, 04:42 PM I can't send you an IM because am at work. It is for a B14 200sx se-r. Call me if you are really interested. Bryan Rom7eo 05-01-2002, 10:36 AM Are you willing to sell the ECU alaone? Email me, rom7eo@aol.com. Dswtflip4u 05-01-2002, 10:48 AM I emailed you Rom7e0. ThomasSr20 05-01-2002, 10:32 PM I don't think u could use the B14 ECU on the B13 cause the harness is different, only the Nx2000 and the B13 is the same. Damn it, i was hoping the manifold is for a Highport motor, cause i am also stuck with a lowport 4fogger manifold. Dswtflip4u, think twice before going turbo man, u will really miss the nitrous. :D :D :D Dswtflip4u 05-01-2002, 10:59 PM I don't think I will if I am gonna push 300hp. Bryan | ||