anyone with a det i am looking for pics of the front of the block to see where the stock oil/coolant lines bolt up. thanks

ur in luck. my turbo is off right now. ill take a pic in the morning

the only think you need to tap on the block is the oil return line. The oil feed comes off the sending unit and the coolants lines come off the heater hoses. That is the easiest way. Got to JGY and get the kit to do it.

I may be wrong... but I think he may be speaking of a stock DET block/coolant lines. It would be interesting to see that pick.

http://i32.photobucket.com/albums/d35/djtwinky/block.jpg

the other water line on mine is behind the thermo stat housing.

are the 2 on the left water?

are the 2 on the left water?
The upper left is water, the lower left is oil. The other water is off the T-housing on the tranny side of the motor... as previously mentioned in this thread.