keith455
04-24-2002, 10:14 PM
I'm trying to do my front brakes again on my 92 SE-R and i'm running into problems finding the correct brake pads. Just for kicks I asked the guy to show me the pads for a 1.6L, well they are the same pads that came off my car.
What's the deal?
Should they be the same? Did some previous owner replace the brakes with 1.6L ones?
Has anyone else ever ran into this issue?
THanks
Keith
MaddMatt
04-24-2002, 11:56 PM
If it helps at all, the FMSI number for the backingplate for 91-94 SE-R pads is #509. The NX2000 is #549.
johnand
04-25-2002, 09:11 AM
I have a 1.6 that I just put SE-R brakes on it and the pads are definitely different. The 1.6L pads are a little shorter and not quite as wide as the SE-R brakes. The 2.0L calipers are a quite a bit different than the 1.6L ones.
If you want, I can take pics of my old 1.6L pads and my new SE-R pads tonight when I get home. Then I could email you the pics.
keith455
04-25-2002, 02:39 PM
That would be great. I did find these pictures of the NX2000 and 1.6L brake comparision.
http://www.sentra.net/tech/garage/brakes.shtml#Brake%20Hop%20ups
But none of SE-R and 1.6L.
Thanks
Send the pics to keith455@syty.net
Sr20kidD
04-25-2002, 03:03 PM
95-97 200SX front brake pads for the SE-R and the SE are the same.
MaddMatt
04-25-2002, 04:17 PM
95-97 200SX front brake pads for the SE-R and the SE are the same.
He's got a '92. The pads are not the same for that year.
keith455
04-25-2002, 09:14 PM
Here's some pics of my brakes.
What do you think?
http://syty.net/personal/SER/Images/brakes/