Hey
I got the ECU put it in and im driving the car around and for some reason I cant rev past ~6600RPM (It could be 6800 not sure) any ways... I thought you forgot to modify the RevLimit so I said no biggy and I used Calumsult to dump the Rom on ur tuned ECU. Long story short the rev limit in the BIN file IS 7800RPM... Any suggestions on what it could be?

Thunks

hey
aiite now I think I have a real problem... When I use the map data trace feature in nissan data scan the TP values on the X axis doesnt look right.... It doesnt look like the values that youve put on the ecu

look at this:
TP values max is hex43 that is so wrong it isnt funny...
http://i111.photobucket.com/albums/n131/zion2999/maptrace.jpg

I'm not sure whats up with your TP axis.

I think I know what your rev limit problem. This is the SR18DE ecu running an SR20DE but using the SR18DE maf, right? I bet the SR18DE must have another rev limiter, let me see if I can find it. I used the stock SR18DE base rom for your program. Something else to try is see if the car will run with a SR20DE base rom. Download a stock se-r rom and see if the ecu will accept it. If it does I'll just e-mail you the regular se-r program set for your maf.

Hey back in the day I tried using the Sr18 maf with a G20 ECU and it only reved out when the car was floored (WOT) so I think it will run its just that we have to set the MAF to take the correct readings.

Hey calum, could you send me the stock sr18 bin so i could look through to find the revlimit oh and also the tuned bin 4 you have so I can make the changes to my ecu...
thnks

Can you send me an e-mail and remind me? I'll mail them to you in the morning, I'm not near my home PC right now.