I going to be doing a BB motor with a t-25 or t-28 setup eventually. If I have the ECU programmed for 9:5 compression to run the turbo setup on my DE motor until it blows up, then intall the BB Block, would I need to reprogram the ECU for a compreesion difference?


Thanks.

-Kris

My guess is that it would work... but you'd make more power if you got a new program. Reason being, with the higher compression you have to be more worried about detonation so there's maybe less timing, more fuel, i.e. it's a more conservative program than what you'd use with 8.5:1 compression.

Khiem

Engine managment is the only way to go in my opinion !!!!!!!Cost me 1400 for SDS change your mapping whenever you want or anytime you change something!!!!!!!Just my 2 cents !!!!Thanks,Mickey