OK, i am looking around cruthfield for some after market speakers, I found components that i want, but it says they will nto fit my car. In fact if only gives a few options, which are not components (which is what I am lookign for). Anyone have aftermarket sepakers in their car? If so what kind and what size/modifications did you avhe to do???? '96 Nissan 200SX SE-R

I just got the audiobahn 6 1/2" all the way around and it sounds very crisp and clear. Those nissan stock speakers were total crap. A buddy of mine has boss competition 6 1/2" in his 200sx and his sounds almost as good as mine. It just depends on how much money you want to spend. Infinity also makes very good components, and for a reasonable price.

Let me know exactly what your looking for and i can get it for wholesale prices.

4 - 6 1/2" audiobahn - 129.95
4 - 6 1/2" boss competition - 69.95
4 - 6 1/2" infinity components - 149.95

I have the 6 1/2 Boston Accustic Rally's with seperates on the doors. 3 way 6x9 Boston's in rear deck. Sounds awesome.

you fit 6x9 in the back panels? HOW

hey daniel are those autobahn speakers component or coaxil?

He probably cut the back deck out to fit them in... I did that in my Mx-6 since it had the cheapie factory circles....

I am using Sony 6.25s' full-ranges all the way around I believe... ;)

I think... :cool:

I have Diamond Audio components in the doors, with the tweeters mounted on the plastic pannel covering the side mirror mounts.

and these all fit without having to do any mod's to the housings???

i got some old nakamichi 6 1/2's in the rear deck. the tweeter is removeable, but i left it in place. fit is tight on the torsion rod. they won't fit in the doors w/o a bit of fabrication. model #sp65c. probably don't make them anymore though.

Ric

I have JBL 6"1/2's fpr all 4. They went in the back without a problem. altho the front i needed to drill some holes etc. to make them fit but all in all they sound good. i got them From a site that sells stuff cheap http://www.justcarspeakers.com

Where in texas are you, daniel?

I have four Alpine 1729's all around and then some tweeters on the black mirror mounts. Of course the alpine works great, but they are kind of pricey, around $200-$250 for four. I can't remember. The tweeters are in the best spot, since they are black they look stock. I also have 2 Alpine Type-S subs in my trunk which sound phenomenal! Do Alpine components fit our car? Mine is a 96 btw, and I had to do no modifications to make anything fit.

I have four Alpine 1729's all around and then some tweeters on the black mirror mounts. Of course the alpine works great, but they are kind of pricey, around $200-$250 for four. I can't remember. The tweeters are in the best spot, since they are black they look stock. I also have 2 Alpine Type-S subs in my trunk which sound phenomenal! Do Alpine components fit our car? Mine is a 96 btw, and I had to do no modifications to make anything fit, well except for the tweeters I had to drill a hole of course.

oops sorry! I just added a sentence to the post. :)

Stock speakers are just totally shit. I busted all 4 of mine. My 6.5 didnt bolt up very good in the back and it I remember right I was thinking 6 3/4 would fit better. My front ones are 6,5 and fit good.

I have clarions in the back and kenwoods in the front. The sound good but arent bass speakers like Fosgats.

I put Infinity reference series all around. 6.5 components in back and seperates upfront. I have the front tweeters mounted right infront of the door handles, looks factory installed ;) (if you want a pic I'll post them). They sound very crisp and clear, oh yeah and are very well built. I've had them for over a year now, pound the sh*t out of them, and they hold. I'm running them off of a pioneer premier 4 x 50 rms amp set at only mid and high frequencies.

Could youpost a pic of those?? Thanks!

http://communities.msn.com/200SXSER/shoebox.msnw?action=ShowPhoto&PhotoID=1

http://communities.msn.com/200SXSER/shoebox.msnw?action=ShowPhoto&PhotoID=2

http://communities.msn.com/200SXSER/shoebox.msnw?action=ShowPhoto&PhotoID=3


I hope this works :confused:

thats nice.. looks stock!!

Originally posted by Sr20kidD
thats nice.. looks stock!!

Thanx :D

It was fairly easy to do as well. A little measuring and drilling, but nothing difficult.