How do I know if I have ABS? [Archive] - SR20 Forum

: How do I know if I have ABS?


95se-R
05-03-2002, 05:05 PM
i need to order new front axles for my 92 se-r and don't know if i have ABS since it was a option in 92.

skiddusmarkus
05-03-2002, 05:06 PM
Drive quite fast then when it's safe to do so,brake as hard as you can(on a straight).If the brakes lock up you haven't etc.

BORNGEARHEAD
05-03-2002, 05:18 PM
Turn your car on to run without it running. If you have an abs light on the dash, you have abs.

Toolapcfan
05-03-2002, 05:41 PM
Open your hood, and look at your master cylinder, if it has any wiring coming from it, then you have ABS. If no wiring, then no, you don't.

brian
05-03-2002, 06:27 PM
or look at your caliper, it should have a sensor coming out of it, and your axle will have teeth on it.

DaGenesis
05-03-2002, 06:56 PM
or.......

id keep it goin, but i dont know what else to think of :D

sleeping 91ser
05-03-2002, 08:04 PM
or......look at the upper left side of the engine bay kinda by the fire wall and there will be a box attached to the side that has all abs plugs and the computer.
sean

Black93
05-04-2002, 11:07 AM
or...

if you have two lines coming out of your MC then its ABS if there are 4 lines coming out of your MC then its NONABS

NismoSER
05-04-2002, 11:56 AM
or you can listen for the ABS self check test that it sometimes runs shortly after startup....just listen for the 4 second "bzzzzzz" that comes from your engine bay :p

Black93
05-06-2002, 01:07 PM
Originally posted by NismoSER
or you can listen for the ABS self check test that it sometimes runs shortly after startup....just listen for the 4 second "bzzzzzz" that comes from your engine bay :p

OH how i miss that noise... NOT :D:D:D:D