|
: Prototype Hotshot Performance Turbo Kit! Pages :
[1]
2
TurbochargedSER 05-03-2002, 09:28 PM http://apexser.freeservers.com/hs1.jpg http://apexser.freeservers.com/hs2.jpg http://apexser.freeservers.com/hs3.jpg http://apexser.freeservers.com/newpipes.jpg http://apexser.freeservers.com/newdp.jpg Thanks Andris! SERprise In WV 05-03-2002, 11:45 PM Good Lord, Louis, that thing is spec-ta-cu-lar! I cannot wait to see how it works on your car. Soon! Andris, you may have to put me on the list for one of those over the summer. Really. :D art_from_ct 05-04-2002, 01:01 AM That manifold is beautiful ! Does it clear the stock fans ? andris 05-04-2002, 01:32 AM Originally posted by art_from_ct That manifold is beautiful ! Does it clear the stock fans ? yes!. That was one of my design goals. It did make it a bit of a pain in the ass (among other stuff), but it went on my car with a little convincing; I've got two stock, unshaved fans and the thicker Nissan Motorsports radiator. Doesn't touch anything once on the head. andris SucKit 05-04-2002, 02:05 AM I see you tapped runner number one for the egt. Is there any particular reason for that cause I have to tap mine soon and was thinking number three from visual inspection. Anyways that shiet is too beautiful, what I would do just to hold it for a second!!! bl200sx 05-04-2002, 11:44 AM wowwwwwww..............that manifold is very intresting, it looks like it has equal length runner's. FastNX 05-04-2002, 04:30 PM wow, let me see if if got this right: the turbo sits up top, the wastegate is down low??? that would look very interesting when you popped the hood!!! I'm not too sure wgat underhood heat would be like :~ ClassicSE-R 05-04-2002, 10:06 PM Andris, you might want to segment the flange (head-to-manifold flange). I know that that can help prevent warpage. Did you use 321 on the flange, or is it 304? The design and construction look first rate. Very very good job! Rob insaneser 05-05-2002, 06:13 PM is this manifold for a t3/t04e turbo or the t series turbo's ? does this have the turbo sit about where the fmax manifold has the turbo sitting? andris 05-05-2002, 07:23 PM Originally posted by insaneser is this manifold for a t3/t04e turbo or the t series turbo's ? does this have the turbo sit about where the fmax manifold has the turbo sitting? T3/to4E turbos. The turbo sits in the same general location as the FMAX log manifold, but its rotated slightly and sitting at an angle. I also believe it is slightly higher in the engine bay. andris insaneser 05-06-2002, 09:51 AM CAN YOU GET THE MANIFOLD WITH A FLANGE FOR A HKS WASTEGATE ? WHAT IS THE PRICING ON THIS PIECE ALONG WITH THE DOWNPIPE AND THE EXHAUST CONNECTIONS ?? TurbochargedSER 05-06-2002, 09:58 AM Originally posted by insaneser CAN YOU GET THE MANIFOLD WITH A FLANGE FOR A HKS WASTEGATE ? WHAT IS THE PRICING ON THIS PIECE ALONG WITH THE DOWNPIPE AND THE EXHAUST CONNECTIONS ?? This manifold is flanged for an HKS Standard Wastegate! It will not be in production for some time since it is the prototype and we need to do some testing before HS begins to sell it to the public! insaneser 05-06-2002, 10:37 AM i really like that manifold i think i would change out my fmax manifold for the hotshot !!!! what are the intercooler pipes made of ? i might have to change the pipe from the turbo if it sits in a different position with different angles ! TurbochargedSER 05-06-2002, 12:39 PM The intercooler pipes are made out of mild steel. Stainless steel or aluminum will raise the price drastically! insaneser 05-06-2002, 01:09 PM Is this manifold being tried on your car louis ?? will hotshot go into production on these ?? what manifold did you have before ?? whats the spec's on that turbo in the picture ? insaneser 05-06-2002, 01:17 PM it looks like the exhaust pipe has a place where the wastegate would dump back in !! can you get it without the return for the wastegate for those who dump to atmsophere!!?? TurbochargedSER 05-06-2002, 02:21 PM Originally posted by insaneser Is this manifold being tried on your car louis ?? will hotshot go into production on these ?? what manifold did you have before ?? whats the spec's on that turbo in the picture ? The pictures were taken a couple of days ago. I have the manifold on my car at this time. It shold be running by the end of the week. I had the FMAX log manifold before this manifold. My turbo specs are as follows: .82 A/R Extrude Honed Turbine Housing Stage V Turbine .60 A/R Compressor Housing 60 Trim Compressor There is still a lot of testing required before Hotshot puts it on the market! kenley_ser 11-14-2002, 04:24 PM hey louis just wanted to know what ever happen to this manifold since this post was dated in May, wanted to know if Hot shot decided to produce it or not, I am looking for a bigger turbo, so I was going with Fmax Stage II but this is nice. ITR_KILLR 11-14-2002, 04:34 PM If you wanted to peice together your own kit, Protech makes manifolds for the T3/T04. I think he has an equal lenth manifold, and I know he makes log style. kenley_ser 11-14-2002, 05:18 PM do they have a website or a phone number to get in contact with them?? | ||