|
: spun bearing lookin for swap hops2k5 11-07-2006, 12:08 AM I have a 94 sentra E with the DET in it and it has a spun rod bearing. I'm in vancouver WA. I have the new engine and everything and I am looking for someone who can swap it in for me cash in hand. Any help would be greatly appreciated. B14 Se-Rious 11-07-2006, 12:28 AM you should have changed the bearing. brokeser 11-07-2006, 03:38 AM you should have changed the bearing. :iagree: Atleast check it to see how much damage you have on the crank... L hops2k5 11-07-2006, 04:17 PM I don't have the tools to do that McCoy 11-07-2006, 04:20 PM Moved this to the 'West' section. Where are you located at, that might be a good start for finding someone close to you that might be able to help. SENTRAMAN 11-10-2006, 02:31 PM I can do swaps, same as a couple other guys on here... I am currently doing a G20 DET right now... you can PM me quinnmyster 12-07-2006, 05:09 AM I'm putting a U13 DET in my 93 SE-R and I was wondering if you were running too much boost or something to blow the engine, and if so, how MUCH boost? Cause I don't want blow stuff up. If you could let me know, I'm really interested in being SAFE with my setup :) Thanks, buddy. | ||