|
TurbochargedSER 05-06-2002, 01:56 AM http://www.apexser.freeservers.com/boost1.jpg http://www.apexser.freeservers.com/boost2.jpg http://www.apexser.freeservers.com/boost3.jpg http://www.apexser.freeservers.com/boost4.jpg http://www.apexser.freeservers.com/boost5.jpg james vick 05-06-2002, 02:04 AM Looks good Louis. The design of the manifold is cool. Can't wate to see the dyno #'s. Rockwood 05-06-2002, 03:37 AM thanks louis, now i'm jealous! :D Jackson Diamond 05-06-2002, 01:56 PM Looks very nice. Hows ground cleareance with the wastegate sitting so low? Looks like a very tight fit for the down pipe! But looks damn nice. TurbochargedSER 05-06-2002, 02:25 PM Originally posted by Jackson Diamond Looks very nice. Hows ground cleareance with the wastegate sitting so low? Looks like a very tight fit for the down pipe! But looks damn nice. Clearance is fine. Andris built the intercooler piping to fit above the radiator support so you don't have to worry about dinging the piping like the FMAX. The wastegate does sit where the a/c compressor used to sit, but I think anyone who would be purchasing this manifold will be buying it for all out power, not daily driving, although, Andris may be working on moving things around a bit for their production kits! Rob 05-06-2002, 02:41 PM is this the same kit that HS sells on there web page? that intercooler is HUGE! bl200sx 05-06-2002, 03:55 PM wow...........it looks very nice Louis, can't wait to see some hp # on it. TurbochargedSER 05-06-2002, 04:46 PM Originally posted by Rob is this the same kit that HS sells on there web page? that intercooler is HUGE! This kit is *NOT* available for sale yet! This kit is not in production as of yet! The intercooler willbe a smaller Spearco unit when the kit becomes available! My intercooler was custom and will not be offered. Se-Rious92sentra 05-07-2002, 12:27 AM What is the wait on a HS kit like off the web site (if any) TurbochargedSER 05-08-2002, 04:59 PM Originally posted by Se-Rious92sentra What is the wait on a HS kit like off the web site (if any) I am not sure how long the wait is on the old turbo kit! You would have to contact HS directly! Matt 05-09-2002, 11:43 AM I don't think you can get their old kit through the site anymore. I know Dynamicturbo.com sells them. Luis, do you have ANY idea of what this kit MIGHT run IF it were to make it to production? From the looks of things I won't be heading the boosted route for a while so I'm going to need to save a lot. For someone like me, knowing what a kit like this might run will give me something to save for. TIA TurbochargedSER 05-09-2002, 12:20 PM There is *A LOT* of testing that is needed before it is offered to the public. Don't expect it anytime soon! I would say, expect to pay somewhere in the $4500.00-$5500.00 for something like this! 321 Stainless Steel is pretty expensive. Labor to hand build each manifold will be pricey also! When the kit is released, it will not have the large intercooler, large T3/T04E that I am running or the Greddy Type "R" BOV. It may only include MSD 50 lb/hr injectors, Greddy Type "S" or HKS Standard BOV, Tial 35mm wastegate rather than the HKS Standard, and a smaller T3/T04E rather than the .82 A/R Stage V turbine T3/T04E. It will be a complete kit; piping, turbo, manifold, downpipe, etc.. will all be included. I think what all of you need to realize is that this is *NOT* your average turbo kit! It was intended to build MASSIVE power! I would highly recommend looking for other alternatives if you are not looking to make 450-500 whp! | ||