I'm selling a stock Bored B13 SE-R MAF. It has the stock sensor, but the housing has been bored out 8-10mm over stock. I'm looking for $75 on this shipped obo.

I also have a Clutchnet Type 1pp and copper/fiber disc to sell. I has about 10K miles on it, daily use, no racing, pretty normal driving. I changed my setup and bumped my power up over the 280hp limit of this clutch and it started slipping. It's in good shape, and seems to have decent material remaining. I'm going to take it to a clutch builder and have it micrometered and inspected to ensure it's in as good of shape as it looks, but I don't see a problem. In any case, there's absolutely no problem with the pressure plate. I'd like to get $150 plus shipping out of it. It should have plenty of life left in it.

hi do you have any pics send to jugosmooth@optonline.net or give me A call 631-258-0541 sergio

pics of which?

umm, just wanted to say that the stock b13 ser maf housing cannot be bored 8-10 mm. that is because the stock housing is at 50mm, and andreas miko's is at 53.5mm. u might want to measure it...

pics of the maf

I'll try to get a better measurement and pics when I get back in town on monday.

MAF has been bored to 54mm, same specs Miko has his mafs bored out to. I made 280whp with this same MAF.

bump

Do you still have the bored maf let me know I need one asap thanks

Do you still have the bored maf let me know I need one asap thanks


Yes he still has the MAF.

how much shiped send paypal or let me know how you want the $ thanks or call me 631-258-0541 thanks sergio

how much shiped send paypal or let me know how you want the $ thanks or call me 631-258-0541 thanks sergio


$75 shipped. The MAF is actually mine, its at his house about 5 miles away. My paypal account is nismofreak@insightbb.com. If you got any questions my cell is 502-718-1700.