|
madmoney 05-09-2002, 08:01 PM a friend of mine is wanting to go turbo so i told him i would help him build a sr20det from a fwd sr20de, if possible. it should be since its the same block. what i was wondering is if the head is different or what i know the turbo manifold and intake manifold is diff. what else is different. thanks David 240SRacer 05-24-2002, 10:21 AM There is also some diferrences in the Compression. I know the FWD N/A SR20DE has a higher Compression ratio than a SR20DET. Also you will prolly need at leat 370CC injectors depending on the PSI you are thinking of running. My concern is will a RWD Tranny bolt to the FWD block. If it will then I think you may have a go on this project. I have been thinking about it also for my S14. I want to make a High revving N/A powered SR20DE but in N/A form. My idea was to get a FWD SR20DE from a G20, slap on the RWD tranny from A DET, get the Sentra ECU, custom headers, use a greddy intake manifold, and it should be able to run. Why N/A SR20DE? Why not:) TX180SX 05-24-2002, 11:20 PM Why not just get a rwd SR20DE? :confused: | ||