|
pjsammy 05-10-2002, 11:21 AM hi I was talking to OnyxEros yesterday about putting 91 cams in my 00 SE, and he mentioned that it may not work (roller arms different?). Let me know what the deal is on this (neither of us were too sure). Thanks. samir Storm88000 05-10-2002, 02:52 PM Yeah, it wouldn't work. I'd assume you'd damage the engine. pjsammy 05-10-2002, 03:04 PM Thanks. That's what we thought, but I figured it would be a good idea to check with some of the overlords of the SE-R world. jacen99SE 05-10-2002, 08:31 PM I know the cam profiles are different, and I think the roller rocker motors have lighter valve springs, and I haven't heard about it being done. I searched the se-r.net archives and I didn't find anything about doing this. I wouldn't try it.... Anime Gee 05-11-2002, 10:47 PM It won't work. :( Check the valve covers. The '91 is low & the '00 is very high. It's totally different. Just wait a while till JWT or somebody comes up with some good ones & an ECU for them. Xsanity 05-12-2002, 05:23 PM JWT has some with a S3 grind on them, they run around 560 a set.... no ECU yet ***. but the idle is fine, had some cold start issues for awhile, but thats resolved itself. se-riousleeper 05-12-2002, 06:23 PM hey those jim wolf cams are awesome, i had a set in my 98 sentra se with the sr20de, and im getting the new ones for my 01 sentra se, big improvement in upper rpm horsepower. | ||