okay. so for the past week ive been putting an sr20det gtir engine in my 98 sentra. me and my friend hook the whole wiring harness up in like 5 hours. making sure everything was in it spot. so im getting an aplsol selonoid malfunciton and dpfe circurt malfunction on my obd II scanner. also a dual alternator malfunction? The injectors wont get jack sh*t for fuel. i tried reading ohms on the volt meter and it wont read anything. no volts. no ohms on the injectors. car wont start at alll. turns over. has spark. nothing. this is how i have the resistors wired. i have all the white ones to the white wire on the resistor block. then they go to the injectors. any help please? if i dump fuel in the manifold it starts right up! so i know theirs spark and its working right. i used the distributor off of my 98 sentra. will that cause a problem. need help asap!!!

which wiring harness did you use? and you have to swap to tps wires

you can do it of 2 ways

swap the motor in, swap all the sensors from the DE motor and use the DE ecu and plug and play everything with a DE MAF and DE o2 sensor w/ DE Dizzy

if you use the gtir ecu, you need al lthe gtir sensors and gtir wiring harness. When you said it took you 5 hours to work out hte wiring it seems crazy because there is almost no wiring that needs to be done, its all plug and play. So Im going to guess you screwed up your harness somewhere.

wait to i have to change all the sensors? my friend said he did his before and all he had to do was splice new connectors to the ends. did he just fuck me uphttp://sr20forum.com/editpost.php?do=editpost&p=1759640
Edit/Delete Message
what all sensors need to be swapped over. if u could list them all it would be great!

wait to i have to change all the sensors? my friend said he did his before and all he had to do was splice new connectors to the ends. did he just fu*k me uphttp://sr20forum.com/editpost.php?do=editpost&p=1759640
Edit/Delete Message
what all sensors need to be swapped over. if u could list them all it would be great!

To give you the answers we need more info. Did you use your stock ecu and harness or the GTI-R ecu and harness?

Mike

Snowballz, you already have a thread started in the Turbo section about this... please update that thread and not start multiple threads.

Here is your other thread, incase you lost it...
http://www.sr20forum.com/showthread.php?t=180513

-locked-