just to bring yall up to speed... it's a B14 with Tein Basic Coil overs and superpro increase caster bushings. for those that aren't aware these bushing increase the caster setting and by doing so you get more camber at cornering... since installing i'm getting better response from the stearing and turn-in is quicker.... but just this damn clunking noise when turning right, (only right) under acceleration i will get this strange clunking noise... it seems to be coming from the front left wheel... I have changes the axle's bushings (superpro bushings) and had the car aligned... strange thiing is when i had the axle and bushing replaced the noise happen once i turned the steering to the right slightly as if to change lanes... but once i had the car aligned it only happened when taking right hand corners under accelaration.

i've looked around on a few forums but wanted some in put from you guys... so far i was thinking of replacing the uper strut mounts... because there's a little bushing and a washer that allows the strut assembly to turn, if i'm correct... and these parts tend to get warn... the other thing is i was thinking of, is to change the cross camber setting and reduce it from the stock setting.

appreciate any advice that you can give, thanks