JayBay
01-08-2007, 05:54 PM
This is a used pop-charger, warm air intake, for the GA16 (1.6L) engine. I had this in a B13 XE, but I assume it will also fit the B14 chassis.
One of the 4 bolt-holes that mounts the intake to the MAF has been stripped out. I'm sure you get a machine shop to fix it, or you run it with 3 bolts as I did. I never had any problems with it using only 3 bolts. The filter is in good shape, it was cleaned and oiled recently.
Looking for $50 shipped, or a bit less picked up in Haverhill, MA. Thanks.
http://img484.imageshack.us/img484/3629/img0813largehr5.jpg
http://img170.imageshack.us/img170/8162/popcharger2sk8.jpg
One of the 4 bolt-holes that mounts the intake to the MAF has been stripped out. I'm sure you get a machine shop to fix it, or you run it with 3 bolts as I did. I never had any problems with it using only 3 bolts. The filter is in good shape, it was cleaned and oiled recently.
Looking for $50 shipped, or a bit less picked up in Haverhill, MA. Thanks.
http://img484.imageshack.us/img484/3629/img0813largehr5.jpg
http://img170.imageshack.us/img170/8162/popcharger2sk8.jpg