I'm sooooo close to getting the swap done (bb det). I just need your guys help on making sure I have everything. Any tips or ANYTHING I forgot?

Here is a list of what I have done/ what is on it's way: JWT ecu, rod/crank bearings, thrust washer, t/o bearing clips, axle seals, act s/s clutch, mt-90, oil/boost guages, 255 fuel pump, profec b, stock bov, bluebird intake piece w/MAF adapter, p/s shifter, stock i/c piping, and stock-plugs, wires, cap, rotor, fuel/oil filter, radiator hoses.

C'mon guys, I know there must be something else. I still have the bottom end apart, so anything else I should do? I still have a week or so to order things so let me know what I need.

Edit: I most likely will have the 2.5in JGY dp and I will have 3in catco cat, 3in dynomax resonator and magnaflow round muffler. Reduced bent except for 2 90* mandrel bends. (Similar to SERprise in WV's)

Thanks.

what kind of exhaust setup are you going with?

Jwt motor mounts, and air/fuel gauge...thats all I can think about. Hope that helps.

I also just ordered ES motor mounts and shifter bushing.