I got some 780cc injectors and a jgy rail,I have a B13 and the injectors and harness came off a B14.So my question is how much different is the B13 and B14 injector harness.I was sent the B14 harness but it is no where near fitting my B13.Do I cut the injector plugs off and put them on my B13 harness,and where do I install the resistors?Any help will be great!

The B14 harness will NOT fit your B13. Unless your B13 is a '94.

You will have to cut the harness that was sent and use the injector plugs that way.

Mine is a 92, so no it wont fit.So once I cut the plugs and put them on my B13 harness,where exactly do I put the resistors?

Most people install them right off the ECU. Not under the hood.

But can they be wired in right or the injector harness,a inch or 2" from the plug.That seems ALOT easier?

It will still work, yes. Anywhere in line of the ECU and injectors will work.

It just won't be as nice and clean.

Thanks! I will install them like you suggested.