ok got a bbdet and i shit canned the air and well i shit caned the water pump . i think a sr20de with out air run's one belt for everthing right so do i need to swap my crank pulley out or what i just need to run the alt. and power stering that is it help:confused:

does this question dumb found every body????????????

An SR20DE cannot run on just one belt...well...actually it can, but the engine would either seize or stall. The outer belt runs the A/C and the Alternator. The inner belt runs the P/S and the oil pump.

I'm sure you can figure out the rest.

ok i am pretty sure the oil pump is behind the front timing cover not where the power stering goes

oops, my bad. It's not the oil pump but rather the water pump. My apologies.

Well answer this for me. I'm taking out both Air and P/S. Is it possible to get both belts??

You can easily get a belt for non-A/C SR20DEs. For the P/S belt though, that may be a different story. I have a feeling that if you totally skip the P/S pulley, you may have belt clearance problems. Luckily for you, Joel at Random Thoughts created a P/S eliminator kit. You should be able to find a thread somewhere on this board regarding his new 2nd gen kit.

Thanks