What size nuts are used to bolt the Down pipe to the BB T25 exhaust housing?

Thanks

3 14 mm. You will need a deep socket.

Craig and Terrin, let me add one more detail to this (and this is from my T28, which I'm *assuming* has the same threads on it).

You're looking for metric nuts to go on the DP threads, and I found them at AutoZone (MonkeyZone). Yes, Terrin, they can be removed/applied with a 14mm socket. However, they are #10 size, with a 1.25 thread pitch.

Write that down.

I had a b-i-t-c-h of a time finding this out.

Originally posted by 92SE-R
3 14 mm. You will need a deep socket.

What he said! :D


Ben