|
Clint 03-11-2007, 08:15 PM Does anyone know where I can get an O2 sensor extension loom from for my Primera (G20 would probably work too). I've got the Fujitsubo headers and have the O2 at the rear of the motor now rather than the front. Thanks. Fosters 03-11-2007, 10:25 PM I just made one for the same situation. The cleanest way was to find a junk O2 sensor, and make one for your length. Josh pedronx2k 04-09-2007, 09:17 PM had to do it with my buddys civic hb just cut and sloder or crimp wire for wir to the right lenght budsang1 04-09-2007, 10:14 PM you could try a z32 sensor, it has much longer wires jaed 06-01-2007, 08:25 PM you could try a z32 sensor, it has much longer wires Interesting, would the specifications and everything be the same? I'm after an O2 sensor for a 1995 P10 Primera after fitting factory headers in place of the cast manifold, which of course uses a different sensor! hpro123 06-02-2007, 04:15 AM Follow his advice JAED. He is absolutely right. Search around though because, if my recollection is OK, only one of the 2 Z32 sensors has the "extra" long wiring. Everything else (size & "specs") are identical. Aftermarket Generic sensor companies sell the same part # for both cars. hpro123 06-02-2007, 04:17 AM Follow his advice JAED. He is absolutely right. Search around though because, if my recollection is OK, only one of the 2 Z32 sensors has the "extra" long wiring. Everything else (size & "specs") are identical. Aftermarket Generic sensor companies sell the same part # for both cars. | ||