Energy suspension inserts [Archive] - SR20 Forum
PDA

: Energy suspension inserts

Rob_96
03-12-2007, 10:39 AM
just wondering does it come with all the mounts or just 2 for the motor, *** i ripped my rear mount thanks for the help


cheers



rob
BigB
03-12-2007, 10:45 AM
The ES kit is usually just the torque mounts. Those would the ones at the front of the car and near the fire wall.
Shawn B
03-12-2007, 10:53 AM
The ES inserts are fairly old-school at this point.

Do a search on "Prothane" mounts. You can get them from Serban at The Go Fast Depot (forum vendor).

The Prothanes replace the entire OEM mount. Not the outside metal part, but the bushing inside. Press (burn) out the old bushing, press into place the new urethane bushing.
Sigfod
03-12-2007, 04:17 PM
The ES inserts are fairly old-school at this point.

Do a search on "Prothane" mounts. You can get them from Serban at The Go Fast Depot (forum vendor).

The Prothanes replace the entire OEM mount. Not the outside metal part, but the bushing inside. Press (burn) out the old bushing, press into place the new urethane bushing.

Unless you have a B15 :mad:
Rob_96
03-12-2007, 10:30 PM
ya i have a b15 sry guys


cheers



rob
Sigfod
03-12-2007, 10:37 PM
I have a torn rear mount, and a torn e/s insert for the rear mount on my B15.
jere
03-12-2007, 11:18 PM
lol are you trying to sell him those or something :confused:
Sigfod
03-12-2007, 11:22 PM
lol are you trying to sell him those or something :confused:

No I am just stating that they as good as people say they are. I wish prothane would make some flipping mounts.
Shawn B
03-13-2007, 12:08 AM
No Prothanes for the B15? That sucks.

You could also consider doing the "window weld" method of fixing your mounts. I would prefer that over the ES inserts.

http://www.sr20forum.com/showthread.php?t=74431&highlight=window+weld

There ya' go.
2dr_sentra
03-13-2007, 12:11 AM
They make some filler style stuff, i dont remember who used it but it would work nice
Sigfod
03-13-2007, 07:54 AM
No Prothanes for the B15? That sucks.

You could also consider doing the "window weld" method of fixing your mounts. I would prefer that over the ES inserts.

http://www.sr20forum.com/showthread.php?t=74431&highlight=window+weld

There ya' go.

I have been looking at the trans mount for the B13/B14 , and it looks similar in size to the B15 trans mount. I will have to take some measurements when I am under there this weekend doing the Axle.
Rob_96
03-13-2007, 04:42 PM
hey boys

the inserts i bought worked great all i am waiting on some bushing that broke and a bolt. thanks for the help everyone



cheers

rob
Terms of Use