I run a stock sr20det in my pulsar, and I'm currently running one single factory thermo fan in the front (on gearbox side) as the 2nd was removed due to clearence precautions and the fact that i cracked the cowling on it when i removed the DE engine. doh. Car runs fine, no problems, but I dont use my aircon, I'm sure it would be a problem if I did run the aircon too..

Anyway, I'm removing the aircon system. I've just purchased two new davies craig 10" thermo fans. I'm wondering if this will suffice, as apposed to say, two 14" thermos?

I'm not running aircon, and the car runs fine with one factory thermo, so these two 10'ers should be ok? Need to know before I take them back and get two 14"s instead.

I'm thinking the power from these two 10s should easily outperform the single 14. The 10s provide me with more engine bay space as well.. better clearance from turbo sheild, etc.

comments?

Thanks!