ZEX/Edelbrock Single Fogger Wet Nitrous Kit. I have a used ZEX nitrous kit with a Edelbrock Nitrous bottle and mount. The original ZEX bottle is pretty much exactly the same as the Edelbrock bottle except for the color and different looking mounts. The ZEX kit was very easy to install and configure. The manual is on their website and can be viewed for installation guide which you could print. Comes with 3 sets of different jets that it came with so you have an option of running mild to wild. I don't know if you are familiar with ZEX but the solenoid box (purple box) is also a brain which reads the throttle voltage and opens at full throttle when activated. The top of the third picture you can see where I got my fuel source from. Which runs between the fuel filter and fuel rail. It comes with this barbed T-connector for easy installation. The single fogger at the bottome of the third picture comes with the mounting nuts used to secure the fogger where you decide to place it. To the right are the 2 extra sets of jets. The other set is in fogger secured in in the picture which I believe was setup for a 75 shot. I think the largest jet set was 75 shot. The jet numbers which are stamped on each jet are also available on ZEX website to view the flow rates. The only thing that you will need to get is any kind of toggle switch to "ARM" the brain whenever you decide to use it or else it'll just be turning on everytime you full throttle. It is also a safety item as well. I had this in my 1991 Integra LS with B16A motor. I think I dynoed it at around 220whp awhile back. I had other mods as well on the motor at the time but it gave me an extra 30+ wheel horsepower.

$300 picked up SoCal

AIM tony42378
email ty423@yahoo.com

http://tony.chubby-bunny.net/sale/Nitrouskit.jpg
http://tony.chubby-bunny.net/sale/Nitrouskit2.jpg
http://tony.chubby-bunny.net/sale/Nitrouskit3.jpg

ttt ttt

buy m3

ttt ttt ttt