I know this can be found on a few sites, but i don't trust other people so I translated it myself and drew a quick MS paint diagram. I'm fluent in Japanese and my wife is native Japanese(i actually needed her help for some of the manual) so i assure the accuracy. I just thought it was weird I couldn't find it on here and had to link to other sites to find it.

http://img106.imageshack.us/img106/8060/greddmsswiresom1.jpg
image shack stuff disappears after a while so maybe a mod can host it differently.

whats the "speed" wire????

Good day,

Do you know if the wiring for the solenoids are replaced or tapped into the stock one's? If it is tapped into what would be the effect on the ECU when the MSS activates.

Also currently I ran a manual switch for testing purposes and a realize that a knock develops from the engine. This also happened when I unplugged the solenoids prior to connecting the switch after I plugged it back the knock was gone.

Thanks much

Good day again,

Just in case anyone is wondering. I hooked up the Greddy MSS no probs. Thanks to Dry for advice.

Shazman

some how this diagram doesnt look accurate.....

Thanks for the information.

THANKS I DID NOT KNOW HOW TO INSTALL THE MSS

can a kit like this be used on a tps?? or do i have to convert to manual to play with shift points

can a kit like this be used on a tps?? or do i have to convert to manual to play with shift points

you can wire it to work off throttle, speed, temp, rpm. it takes a little playing with but you can make it work off just about anything on the motor that outputs a range of voltage. i have now had my mss hooked up since before i first made this post and it has worked perfectly for me everyday since. its a great little device.