99se-lr tells me the beam patterns suck on the depo tsuru headlights. If I buy them, he tells me i'll regret and he'll say "I told you so". I have some silvania silverstars from my stock headlights. Can I just use those instead if I'm worried about blinding other drivers?

I really want to have the HIDs though...

dont put HIDs in unless you plan on retrofitting some projectors in. TSX ones work nice, but i have yet to see this on a b13.

Okay no HIDs then. Will my silvania silverstar bulbs hook up to the tsurus?

yes they will 9003 bulb

non oem tsuru's are bad...esp w/ HIDs. I hacked mine up and doing E55 bixenon on one like I did on my Maxima.

I would say get OEMs if you want HIDs.

u can do HIDs on any head light. look at it this way if your blinding them they will move out the way:D

The ramblings of a true moron... :rolleyes:


u can do HIDs on any head light. look at it this way if your blinding them they will move out the way:D

haha thanks guys

actually, i have the depo tsuru's and my beam pattern isnt blinding to on comming traffic like my friends rides which hav hids. mine hits the ground and glows' there's just has major glare ... people say it looks like the new cars that come w/ hids. as in they arent noticably bright, and blinding, which i think is a good thing.

The ramblings of a true moron... :rolleyes:

U must be talking about yourself .:squint: it was a joke . I guess up there in amish country they dont joke huh...

anyway If you modify a projector in there with the Hids u wont have a problem.

i can agree with the -aftermarket tsurus+HIDs- statement.

the aftermarket tsurus in general are bad, they go VERY cross eyed (left light lights up the right side of the road and vice versa) and they aim VERY high, even with the back adjusters maxed out. the HIDs just make it sooooo much worse. i guess you could get them aimed good (AM tsuru+HID) if you sat and tinkered with it. its DEFINATELY not a plug and play application.

i just installed an after market HID kit in my Tsuru Headlights AND My OEM Foglights

Both look fine... beam pattern isnt all over the place, very bright... looks great.

fog lights came out just as good equally pointed at the floor...

HIDs are bright lights... if you dont wanna blind ppl done buy them...

cool

i just installed an after market HID kit in my Tsuru Headlights AND My OEM Foglights

Both look fine... beam pattern isnt all over the place, very bright... looks great.



Prove it. Take a picture at night of the beam pattern against a wall, I guarantee they look like shit with nasty hotspots and a pathetic cutoff.




HIDs are bright lights... if you dont wanna blind ppl done buy them...

OEM and properly retrofitted hid headlights don't blind other drivers. Ignorant people putting ghetto plug and play kits into non-hid housing do...

theyre the same, the OEM just say Hella on them and dont have the glare gaurd. this is coming from someone who owns the OEM set too.

yea i wondering that too, the oem's dont have the glare guard (the little cup in front of the bulb). and my non oem do?:confused:

Ask for a 2001-2002 Tsuru headlamp, those are the ones that come with the glareguard.

http://cgi.ebay.com/ebaymotors/H4-9003-to-D2S-D2R-Adapters-for-PHILIPS-Xenon-HID-bulbs_W0QQcmdZViewItemQQcategoryZ36476QQihZ016QQit emZ260104930842QQrdZ1

http://cgi.ebay.com/ebaymotors/H4-9003-to-D2S-D2R-Adapters-for-PHILIPS-Xenon-HID-bulbs_W0QQcmdZViewItemQQcategoryZ36476QQihZ016QQit emZ260104930842QQrdZ1

Very cool product. That should help out and stop all that upper glare. I didn't even know they made a product like that. Nice find:biggthump

Very cool product. That should help out and stop all that upper glare. I didn't even know they made a product like that. Nice find:biggthump

funny thing is, i and a few others have been posting it for about 1 to 2 years now.

some forum member sells them, i forget his name