|
: Which is better tial or turbonetics wastegate? Victorious 06-03-2002, 02:38 PM Is there any difference between the tial wastegate and the turbonetics one? Which one is better? And which one should I use if I plan on running at most 14psi, and I'm trying to make around 300 WHP? And where's the best/cheapest place to get one? Thanx CowboyDren 06-03-2002, 02:48 PM TiAL, hands down. Why do you need an external wastegate, though, if you're going to use a T28? Victorious 06-03-2002, 02:57 PM I'm not planning on using the t28 from the GTIR or an S14/15. A friend of mine can get some good prices on turbo's. And more than likely the turbo I get won't have an internal wastegate, but I could be mistaken since I'm new to turbo's. :D CowboyDren 06-03-2002, 03:12 PM I think you have that one backwards, friend. Most of the T28s I've seen do have internal wastegates, since most T28s aren't terribly big, and it doesn't make sense to put big, complicated, external systems on inexpensive turbos. ;) You may want to check with your friend, though... Victorious 06-03-2002, 03:23 PM Like I said before I'm new to turbos:confused: So I could be mistaken. But that's why I'm a member of this forum, so I can pick the brains of those with tons of experience. Anyway, how do you like your turbo setup? Are you running it on stock boost? 92SE-R 06-03-2002, 08:04 PM An external wastegate would help top end though. playatx99 06-03-2002, 10:08 PM i have heard NOTHING but bad things about the turbonetics deltagate wastegates, i think unlucky from the forum had his spike and it grenaded his motor, go with the tial Jackson Diamond 06-03-2002, 10:37 PM I am running a tial, i love it. I would recomend it. Delta gates are not that bad, they just need to be rebuilt once in a while. Hence the price difference between the two. You get what you pay for. Yellow4g63 06-04-2002, 03:55 AM u can get a 32mm Tail from RRE for $225! pep *** yo! Delta gates sucks cause u have to rebuild them once in a while. se-riously boosted 06-04-2002, 11:18 AM Hey andy! check with your DSM buddies if u can find me a good 2nd gen block with crank. 623-845-1640. Yellow4g63 06-04-2002, 02:39 PM most of the DSM guys around here use 1G blocks in there 2nd Gens. They usally just rebuild the 6 bolt motors with 95 pistons and get rid of the balance shaft. If u call RRE they might be able to point u in a direction for a 2G short block. sentraturbo 06-04-2002, 04:24 PM how bout hKS wastegates??? Yellow4g63 06-05-2002, 06:32 AM they cost more than the 35mm tail but they work good. I have had mine for 4 years and it's never spiked on me boost is under control :D unlucky 06-05-2002, 01:45 PM Originally posted by playatx99 i have heard NOTHING but bad things about the turbonetics deltagate wastegates, i think unlucky from the forum had his spike and it grenaded his motor, go with the tial http://a7.cpimg.com/image/55/D9/10450517-d129-007D00C9-.jpg here's what happens when you run a deltagate... Travis CowboyDren 06-05-2002, 04:59 PM :eek: OH, MY GOSH! Your forearms get all hairy?!?! :eek: unlucky 06-05-2002, 07:00 PM LMAO... that forearm belongs to my friend Joey at Terminal Velocity Racing here in town. He's a hairy biatch... Travis Big John 06-07-2002, 09:49 PM Tial all the way. My Deltagate didn't spike, it gave a constant gain of 7 psi. Tial looks a gazillion times better under the hood anyway ;o) John | ||