this was made for a rwd, but the way it looks it might fit a FWD. very nice peice. excellent welds and very high quality. it was made by ctc motor sports in dallas texas. it has 1/2 flanges and is braced in 3 places. it is for an sr20 and is t3 flanged. completely stainless. tig welded.

http://i31.photobucket.com/albums/c354/cutter138/3.jpg

http://i31.photobucket.com/albums/c354/cutter138/2.jpg

http://i31.photobucket.com/albums/c354/cutter138/1.jpg

44 mm tial wastegate- 270

manifold- 525

both -725

this is the same manifold with out the braces, but much better pictures

http://www.putfile.com/kleens14/images/30102

wow nice manifold would be nice to see if it would fit a fwd

i will split them up. i will have a fwd car in about 2 weeks. i will check fitment and let you guys know

price change- 450 for the manifold

250 for the waste gate. i will split them up!! that is dirt for an equal length manifold

If it will work on a fwd I will take it

i know it will bolt up. it depends on the size of turbo you plan on using. you might have hood issues if you are going with something very large

what about the wastegate, that looks kind of high as well

the wategate it about 1/2 inch below the valve cover when mounted it shoudnt hit. let me test fit it an a fwd car and i will let you know. i should have one in about 2 weeks

dibs after pics of proof it will fit a fwd sr20

sorry guys i looked at it again and the waste gate sits very high. it would be an easy fix, just cut it and relocate it.

still selling manifold please call 0r text 7874323315

This won't fit a FWD, unless it is completely re-fabricated.
It won't clear the radiator or the hood.

Great for RWD, though.

maybe someone should post that its sold...because it is