|
Loe Lyf 06-06-2002, 05:06 PM Hello People. I'm taking off my power steering off of my DET before installing it and can't find the belt from nissan to eliminate it. Does anyone have the part # of the belt I need?? If it doesn't exist, can I use an idler pulley from another car?? Thanks Dave Loe Lyf 06-06-2002, 10:18 PM ttt james vick 06-06-2002, 10:22 PM Random thought's racing I think makes a kit for this. Loe Lyf 06-07-2002, 08:17 AM ttt Loe Lyf 06-07-2002, 01:35 PM Found it! 25.25" long!! muleman 06-08-2002, 09:59 AM ok loe how r u going to put this belt on there is no adjustment on the water pump?? (I guess u could just wedge it on if it fit right) well I am not going to run a water pump or power stering:D SmoothDaddyFig 06-09-2002, 05:14 PM Is there a belt that can be wedged in there? Eliminating the need for the adjusting pulley. se-riously boosted 06-10-2002, 03:07 PM The way I did it was by using the kit that Andreas sells which is a sylvia alternator,bolt and bracket which u relocate where the p/s used to go. Loe Lyf 06-10-2002, 11:40 PM What I've decided to do is run the power steering pump with a hose ricirculating oil into the pump to prevent seizing the bearing in the pulley. I realized after the fact that no adjustment is possible, the adjustment lies in the P/S. Oh well!! Not as much weight reduction as I wanted, but less clutter in the engine compartment without the resevoir and all the hoses! | ||