|
Nissanboy561 05-02-2007, 05:54 PM :cool: Ok guys im back again.I found a avenir computer do you think it will work with my setup? w10 avenir motor ser wire harness ser coolant temp ser maf ser o2 sensor 94sentraSER 05-02-2007, 07:28 PM The ECU may not recognize the MAF or may be getting an incorrect signal type from the MAF , making it run like crap ..... but i dont have personal experience McCoy 05-02-2007, 08:35 PM Your MAF and coolant temp will be a problem... do a search under "W10 ECU" in the turbo section, that should point you in the right direction. sr20nuts 05-02-2007, 10:54 PM You will definitely need to change those sensors if you go with the Avenir computer. I ran into that issue with my swap, SE-R Maf sends different signal and voltage causing the ECU to add fuel, coolant Temp sensor from the stock SE-R has a different range and will send a HOT reading to the ECU causing it to add fuel. Needless to say, without changing those sensors you will be running like POO, EXTREMELY RICH!!!! The O2 i am not sure off because that is the one sensor that I used from the DET motor originally, I suggest changing it too though. iamhappy46 05-02-2007, 11:37 PM Use the temp sensor that came with the motor(should be blue from memory) and source a MAF to suit which should be a 54C00 type. | ||