noz13k
06-07-2002, 08:20 PM
Hello, I just installed a SR20DET into a 1991 G20 but I am having a hard time finding an intake pipe. (From turbo to Air Filter) At the moment I am using the inercooler that came with the engine. I was very supprised to find there was just enough hood clearance to use this cooler. It will still need to be replace in the near future to achive proper cooling. The issue at hand is how to pipe the turbo intake to the mass air flow sensor. (MAF sensor)
Example, most Honda cars have the MAF located with in the throttle body, therefore all you need is the intake pipe from the trubo to the throttle body. However nissan cars use a MAF located in the air box. Therfore your intake pipe needs to have an adaptor to mount the MAF.
i called a couple places that sold the entire intercooler kit for the sr20det(which i will eventually get) but would not sell the parts seperately. i'm aware i could have one custome built, but i know that they sell them somewhere already made (to save the money).
Any help would be great.
Thanks
Example, most Honda cars have the MAF located with in the throttle body, therefore all you need is the intake pipe from the trubo to the throttle body. However nissan cars use a MAF located in the air box. Therfore your intake pipe needs to have an adaptor to mount the MAF.
i called a couple places that sold the entire intercooler kit for the sr20det(which i will eventually get) but would not sell the parts seperately. i'm aware i could have one custome built, but i know that they sell them somewhere already made (to save the money).
Any help would be great.
Thanks