I fitting a MSD *** 4 on GTiR
but i not sure what coil that suitable to use

the only option i found from MSD website is
Blaster *** Racing Coil
http://www.msdignition.com/coil_blaster_2_8230.htm

Blaster SS Coil
http://www.msdignition.com/coil_blaster_6_8207.htm

anyone familiar with this MSD related stuff ?
need some guide
emailed MSD but no reply from them

and what is recommended plug wire ?

Thank you

You already have the ***? Not sure how MSD affects DETs but there are known drivibiltiy issues which MSD has admitted OBD1 igniton circuitry isnt happy with .Msd on the lower end of rpm range cause stumbling issues. . Seems that the Crane is better suited for 91-94 and msd if fine 95+ .

i already have the *** 4
not running OEM ECU anymore..
Running AEM ECU
so i dont think the OBD1 related issue anymore

Thank for the feedback

Nope, you are set with the MSD and the AEM box. I have the Digital6 MSD box with blaster SS coil going in my NX. I had it setup in the sentra and it worked fine. Not sure why GTi-R would be any different, I think you are fine.

Brent

Coach
But that is Digital 6

i running *** 4 and planning to run distributor less on the car
i know the 4 unit of *** Racing Coil will work.. not sure the
not sure 4 unit of blaster SS coil will work or not

Coach
But that is Digital 6

i running *** 4 and planning to run distributor less on the car
i know the 4 unit of *** Racing Coil will work.. not sure the
not sure 4 unit of blaster SS coil will work or not


can u go distributer less with the msd digital 6?

Seems that the Crane is better suited for 91-94 and msd if fine 95+ .

I ran the GEN II Crane HI-6S amp matched with a PS-91 Fireball coil on my highport DE and my motor ran like it JUST rolled off the showroom floor. I plan on running the same ignition set-up with my GTi-R motor build - see how it turns out; very pleased with Crane's products.

:biggthump :biggthump

Any one can help ?
Can 4 unit of Blaster SS work on MSD *** 4 ?

Thank you

Ok.. MSD tech support replied and it work

now the next headache
Plug wire and location to mount the Coil !

Make a rectangular plate made of abs plastic or alluminium mount the 4 coils to it and place where battery tray is. I guess something like this: http://www.aa1car.com/library/2004/us20406.htm

yes..
that what i thinking but where to put it only
since the location determine the cable length

Thank for the idea