|
: would an Se-r ecu work on the Nx? 1BAD_NX 06-11-2002, 10:06 PM Guys I've been having idle problems with my BB DET on my nx2000 and the ecu I'm using is from a 91se-r with the jwt turbo program, I'm 99% sure that it should be interchangeable with the Nx ecu but I want to be completely sure. TIA, Nick bigtom 06-13-2002, 06:09 AM yes it is, the only concern is if it has some comflict like MT/AT or CA/FED. should just throw a MIL if that was the case an not affect your idle Andreas Miko 06-13-2002, 06:55 AM It will work just fine. AT will work in MT but MT will will not work in AT. 94 Fed comp is just like 91-93 CA comp. The diffrence between the 91-93 Fed and CA comp is that the Cal comp along with the 94 comp have a sensor called a Ex gas temp sensor. If you do not plug this sensor in the check engine light will come on. You can get this sensor and plug it into your harness from any 200 sx se-r because they all come with it. The plug foe that sensor on the 91-93 Fed is usually tied close to the EGR valve. 1BAD_NX 06-13-2002, 10:37 PM Thanks guys for the great info:) -Nick- Brent 06-18-2002, 08:57 PM I have a manual ecu in my auto nx. Both 91's and everything works fine. They are both stock/no mods done to computer. Brent | ||