|
: Need tool to take off Flywheel.. whiteSentra 05-31-2007, 09:06 PM Need tool to take off SR20de,, flywheel... as you know the bolts have 9 star pionts not 6 sides or 5 stars hole. any light would be great.. thanks , tsua Dudeman258 05-31-2007, 09:15 PM Use a 12 point, thats what I did. Dudeman XxToKeSxX 05-31-2007, 09:31 PM head to napa and git you some 14mm 12 pts sockets.... or you can use a 12 pt wrench and a rubber mallet :) Dudeman preaching the word... Johnny wangwang 06-01-2007, 12:01 AM All you need is a 12point 14mm and an Impact gun. If you dont have an Impact gun, a 12pt 14mm on a breaker bar, and a Crowbar wedged into the teeth of the flywheel and the other end on the ground so it doesnt move will do the trick rex 06-01-2007, 01:12 AM All you need is a 12point 14mm and an Impact gun. If you dont have an Impact gun, a 12pt 14mm on a breaker bar, and a Crowbar wedged into the teeth of the flywheel and the other end on the ground so it doesnt move will do the trick Never thought to use a crowbar to the ground like that, I always used a big flat screwdriver. Kudos, I feel kinda inferior now. :biggthump | ||