can some one tell me how much a standard low port rr sr20de can take if i decide to turbo it

and before anyone flames me i did search but i couldnt find this info

there arnt many guys in the uk willing to try this and i wanna be one of the few before everyone jumps on the band wagon

any help would be great

steve "needaser" is running 12 psi with a t3/04 on a bone stock high port....making 338 whp.

it all depends on the engine. my engine will not be able to run that much boost i know that for sure.

so maybe 6 or 8 psi would be ok then

do a compression test on her if the numbers are good boost it!!

so maybe 6 or 8 psi would be ok then

I think it could handle a bit more than that

:D 1 bar!

can some one tell me how much a standard low port rr sr20de can take if i decide to turbo it

and before anyone flames me i did search but i couldnt find this info

there arnt many guys in the uk willing to try this and i wanna be one of the few before everyone jumps on the band wagon

any help would be great

It's a roller rocker DE, which means it has thin ring lands, I wouldn't go over 10psi.

2.34 bar ;)