Hmm, im currently looking for a complete 2.5" cat-back system for my egg.

But arround here in europe it seems impossible to locate it, only 1 company i found, got the rear muffler. But it doesnt cut it :)

Anyone here able to direct me to a trustworthy seller??



Those i tried so far.
http://www.vrsexhaust.com
They say it costs arround 500$ to ship it to europe, hmm i do have my doubts.

http://www.jgycustoms.com
Suddenly stopped replying to my e-mails :(

I know it aint cheap to get stuff shipped off to europe from the US, but i allso know it doesnt cost 500$ :), since i just got my headers, and deliverd at my adress, it wasnt 500$ for both :)



Any suggestions?

the problem is that it takes up a decent bit of room and its not lite.

Maybe find someone who can do the job for you? I have build my own 3" free flow exhaust inc. 3" megan racing muffler for just over €300,-


..and getting an exhaust from US to Europe isn't cheap.... I've ordered two 3" downpipes from JGY and costed me about twice the selling price to get them over here :squint:

Anyway, good luck

Hmm, im currently looking for a complete 2.5" cat-back system for my egg.

But arround here in europe it seems impossible to locate it, only 1 company i found, got the rear muffler. But it doesnt cut it :)

Anyone here able to direct me to a trustworthy seller??



Those i tried so far.
http://www.vrsexhaust.com
They say it costs arround 500$ to ship it to europe, hmm i do have my doubts.

http://www.jgycustoms.com
Suddenly stopped replying to my e-mails :(

I know it aint cheap to get stuff shipped off to europe from the US, but i allso know it doesnt cost 500$ :), since i just got my headers, and deliverd at my adress, it wasnt 500$ for both :)



Any suggestions?

I just made another myself (my 3rd)

What you need to make one yourself (cat-back)

- 2X 90 degree mandrell bend (20$ each)
http://www.stainlessworks.net/cart/images/90%20bend.jpg

-2X 45 degree mandrell bend (20$ each)
http://www.stainlessworks.net/cart/images/45%20bend.jpg

-Straight pipe 2.5 piping (35$ for 5 feet,you need like 3-4 feet)

-You need to make the pipe inside each other so get them expanded so it just fit in each other,after that,you have to weld it or get it welded

-Muffler 2.75 inch(piping should enter the muffler just right if piping is 2.5)
You can take a magnaflow muffler the 2.5 inch is a 2.75

have a look at the 2 90 degree bend its like this
Its the exact bend you need...
http://i24.ebayimg.com/01/i/05/fc/46/3f_1_b.JPG

Always put the tube from the front of the car indside the next,and the last pipe go inside the muffler

If you think its too complicated,sorry i hope it can help


Dave from Canada

SWEET! cool diy info

Thanks alot for that nice guide :), might be my last option, *** welding it together aint good, the weather here + when it snows, gov. tosses salt on the roads, then the welds would rust, very fast, and it would only last 1 season :(

But i have ben looking arround alot, and i noticed that the Sentra, is allso called B13?, does this mean they share the same platform.
Here in denmark we dont have Sentras, or at least i never ever saw one :)

Meganracing, got a swedish dealership, and i found this on www.meganracing.com
http://www.meganracing.com/products/product_detail.asp?prodid=574&catid=21

Would it allso fit a NX?, i know the N14 Hatch shares the same platform, but i have no clue about the sentra.

they fit with a lil modding. the muffler area in an NX is a lil shorter so you would need someone to shorten the axle back piece. Im not sure where as I did the DIY 3" turbo back as well. but its been done many of times.

But i have ben looking arround alot, and i noticed that the Sentra, is allso called B13?, does this mean they share the same platform.
Here in denmark we dont have Sentras, or at least i never ever saw one :)

Why yes, that is correct

i made the hks exhaust fit on my car, welded on a smaller bodied muffler its for sale right now...

Thanks alot, ill try to order the Meganracing one, and hope i can get it to fit.

Arround here, a custom made exhaust is expensive :(
The cheapest i found so far, that wanted to make it for me, would set me back 995$.
Thats pretty expensive imo :)

I wish the companyes over in the US woudnt charge so much extra, when shipping to Europe :(

I had a place make me one for $250 for a custom 2.5 cat back.

Thanks alot for that nice guide :), might be my last option, *** welding it together aint good, the weather here + when it snows, gov. tosses salt on the roads, then the welds would rust, very fast, and it would only last 1 season :(

But i have ben looking arround alot, and i noticed that the Sentra, is allso called B13?, does this mean they share the same platform.
Here in denmark we dont have Sentras, or at least i never ever saw one :)

Meganracing, got a swedish dealership, and i found this on www.meganracing.com
http://www.meganracing.com/products/product_detail.asp?prodid=574&catid=21

Would it allso fit a NX?, i know the N14 Hatch shares the same platform, but i have no clue about the sentra.
Dont worry im in Canada we have as much snow as in Sweden and lot of salt in the road so my piping last 4 years and a half and my Magnaflow muffler is still like a new

This setup should last 5 years with snow and salt and lots of winter handbrake drifting:D

I can take pics if you want to see my exhaust setup and the pipe i just changed because of the rust(last almost 5 year)

Dave

Send a PM to Tank (TurboTank). Maybe he can get you a VRS catback shipped to you for a little less. But the shipping is killer $$ to Europe. The VRS catback in Stainless can run about $450US, so the $500 price to Europe is probably a good price.

You may want to get the price for an aluminum kit to save about $110.

Send a PM to Tank (TurboTank). Maybe he can get you a VRS catback shipped to you for a little less. But the shipping is killer $$ to Europe. The VRS catback in Stainless can run about $450US, so the $500 price to Europe is probably a good price.

You may want to get the price for an aluminum kit to save about $110.

Ohh think you misunderstood me :)
Its 500 or so for the cat-back AND 500 for the shipping, if it was 50$ for the shipping i would have ordered it asap.

:)

Ill try to contact Tank, i like the VSR one :)