These are fabricated out of 18 and 22 gauge polished or Brushed Stainless. The covers slide right on and need no tools or special equipment for installation. The sills apply with double sided tape onto your existing sill. The plug covers use special hardware that I do not supply but info can be found on this forum. If your not comfortable with the covers just slipping on some double sided foam tape could be used but does not seem necassary.

http://i143.photobucket.com/albums/r133/robj80/car%20pics/Photo0045.jpg?t=1181652823

http://i143.photobucket.com/albums/r133/robj80/car%20pics/Photo0046.jpg?t=1181666067

http://i143.photobucket.com/albums/r133/robj80/car%20pics/Photo0050.jpg?t=1181665947

http://memimage.cardomain.net/member_images/4/web/424000-424999/424118_71_full.jpg

http://students.uwsp.edu/jmcdo533/images/pc_02.jpg
Pricing:

fuse cover-------$ 24.00
relay cover ------$ 36.00
PS res cover-----$ 45.00 (being round is the reason this is a little more)
plug cover-------$42.00 (1/8" aluminum or 18 gauge stainless steel)
b14-p10-p11 sills ----$ price to come
"G20" battery tie down---$35.00 (not available yet, awaiting prototype) 3/8" aluminum
blank battery tie down---$25.00 (not available yet, awaiting prototype) 3/8" aluminum

These are the individual prices not including shipping. Buyers will pay actual shipping cost (UPS Ground). If you wish to purchase all three covers (fuse, relay, ps) it will be $100 with free shipping!

Payment info: paypal funds to robj-80@hotmail.com

or send check/money order to:

Robert Wilkus
35 Heather Ht
Meriden, CT 06450

Yes I will take personal check, but funds must clear before anything is produced.

So far the fuse, relay, and ps res cover have been test fitted on a 99 p11. But if other years have the same covers they will fit. The plug covers will not fit RR/VE covers, but fit all else. The sills lay over your existing sills so if you have the stock sills these will work.

That's me and the best girlfriend in the entire world in the background! The relay cover prototype was 1/8" too small that's why it is just sitting on top. This has been fixed though.

In case anyone is skeptical buying from me my ebay name is redsil80. You can check my feedback there. I've been selling stuff on this forum and g20.net for years.

Wow... sweet product's

I will see if I have enough funds later in the future I will let you know when I am ready.....Bump and nice items.

Thanks for the compliments! Check out the thread over on G20.net as well for more info.

wow. Im gonna have to get a set of these.

I remember you posting on Gnet that other finishes may be available. I wanted to get all three of the new covers but in a slightly darker type finish. Also, I wanted the sill plates, and also are you going to produce the spark plug wire cover that covers the cap area also?

Interested in those sills when you gotta price

Hamzer11 check the g20.net thread. There is a black titanium that would be exactly what your looking for. It is slightly more expensive than the stainless.

All who are looking for sills I'm still working on a price. They are pricing out way higher than I would ever expect anyone to pay and that is my cost. I'm still working on it but if I can't get the cost down than I'm gonna forget about the sill all together.

If you can get anything in titanium I would be down for sure.

check the g20.net thread. Titanium is available. It's actually titanium coated stainless steel. Comes in several colors and finishes. Only thing with the titanium is there is a fine silver line around the edge.

do you mind a link to the thread on g20?

check the g20.net thread. Titanium is available. It's actually titanium coated stainless steel. Comes in several colors and finishes. Only thing with the titanium is there is a fine silver line around the edge.

Black Sharpie!:biggthump

http://www.g20.net/forum/showthread.php?t=64825

ask and you shall receive!