I have a few Q'S
I just purchsed a bb front cliip for $1500 from a guy who bought it but cant put it in he needed money,

so my Q's are what all do i need to install in my 96 200sx se,
i know i need a new motor mount ,and such but will the parts off the clip be interchangable like the distr. harness or would i have to get these parts off a de engine and would the axles fit in also

help would great.
my freinds and i are planning to do this in about a week,
so tips wil be help full.

THANKS.:)

good purchas. actually you will wanna use your harness to do the install. but you will need to send out your ecu to someone to tune it for the bb motor. yeah you will need the distributor form your 96 sr20 motor. remember you will have less vac lines and a few wxtra plugs cause the bb motor dosen't have egr valve. you can re use your trans with your axles to do the install.

jimmy
1996 200sx gti-r
1992 sentra se-r

Huh I think his ad's said it is a 200sx- se.So if you use the bb ecu or a jwt? Also what harness you use ,the bb one or a se-r one there are a lot of things to take into mind.Do sum searching I have a 1997 200sx se and doing the same swap .I bought a 1997 se-r harness and ecu but the harness need mod to fit sum plugs under the dash. good luck